diff options
Diffstat (limited to '.config/nvim/plugged/vim-airline/autoload/airline/async.vim')
| -rw-r--r-- | .config/nvim/plugged/vim-airline/autoload/airline/async.vim | 379 |
1 files changed, 0 insertions, 379 deletions
diff --git a/.config/nvim/plugged/vim-airline/autoload/airline/async.vim b/.config/nvim/plugged/vim-airline/autoload/airline/async.vim deleted file mode 100644 index 8b1678d..0000000 --- a/.config/nvim/plugged/vim-airline/autoload/airline/async.vim +++ /dev/null @@ -1,379 +0,0 @@ -" MIT License. Copyright (c) 2013-2020 Christian Brabandt et al. -" vim: et ts=2 sts=2 sw=2 - -scriptencoding utf-8 - -let s:untracked_jobs = {} -let s:mq_jobs = {} -let s:po_jobs = {} -let s:clean_jobs = {} - -" Generic functions handling on exit event of the various async functions -function! s:untracked_output(dict, buf) - if a:buf =~? ('^'. a:dict.cfg['untracked_mark']) - let a:dict.cfg.untracked[a:dict.file] = get(g:, 'airline#extensions#branch#notexists', g:airline_symbols.notexists) - else - let a:dict.cfg.untracked[a:dict.file] = '' - endif -endfunction - -" also called from branch extension (for non-async vims) -function! airline#async#mq_output(buf, file) - let buf=a:buf - if !empty(a:buf) - if a:buf =~# 'no patches applied' || - \ a:buf =~# "unknown command 'qtop'" || - \ a:buf =~# "abort" - let buf = '' - elseif exists("b:mq") && b:mq isnot# buf - " make sure, statusline is updated - unlet! b:airline_head - endif - let b:mq = buf - endif - if has_key(s:mq_jobs, a:file) - call remove(s:mq_jobs, a:file) - endif -endfunction - -function! s:po_output(buf, file) - if !empty(a:buf) - let b:airline_po_stats = printf("%s", a:buf) - else - let b:airline_po_stats = '' - endif - if has_key(s:po_jobs, a:file) - call remove(s:po_jobs, a:file) - endif -endfunction - -function! s:valid_dir(dir) - if empty(a:dir) || !isdirectory(a:dir) - return getcwd() - endif - return a:dir -endfunction - -function! airline#async#vcs_untracked(config, file, vcs) - if g:airline#init#vim_async - " Vim 8 with async support - noa call airline#async#vim_vcs_untracked(a:config, a:file) - else - " nvim async or vim without job-feature - noa call airline#async#nvim_vcs_untracked(a:config, a:file, a:vcs) - endif -endfunction - -function! s:set_clean_variables(file, vcs, val) - let var=getbufvar(fnameescape(a:file), 'buffer_vcs_config', {}) - if has_key(var, a:vcs) && has_key(var[a:vcs], 'dirty') && - \ type(getbufvar(fnameescape(a:file), 'buffer_vcs_config')) == type({}) - let var[a:vcs].dirty=a:val - try - call setbufvar(fnameescape(a:file), 'buffer_vcs_config', var) - unlet! b:airline_head - catch - endtry - endif -endfunction - -function! s:set_clean_jobs_variable(vcs, file, id) - if !has_key(s:clean_jobs, a:vcs) - let s:clean_jobs[a:vcs] = {} - endif - let s:clean_jobs[a:vcs][a:file]=a:id -endfunction - -function! s:on_exit_clean(...) dict abort - let buf=self.buf - call s:set_clean_variables(self.file, self.vcs, !empty(buf)) - if has_key(get(s:clean_jobs, self.vcs, {}), self.file) - call remove(s:clean_jobs[self.vcs], self.file) - endif -endfunction - -function! airline#async#vcs_clean(cmd, file, vcs) - if g:airline#init#vim_async - " Vim 8 with async support - noa call airline#async#vim_vcs_clean(a:cmd, a:file, a:vcs) - elseif has("nvim") - " nvim async - noa call airline#async#nvim_vcs_clean(a:cmd, a:file, a:vcs) - else - " Vim pre 8 using system() - call airline#async#vim7_vcs_clean(a:cmd, a:file, a:vcs) - endif -endfunction - -if v:version >= 800 && has("job") - " Vim 8.0 with Job feature - " TODO: Check if we need the cwd option for the job_start() functions - " (only works starting with Vim 8.0.0902) - - function! s:on_stdout(channel, msg) dict abort - let self.buf .= a:msg - endfunction - - function! s:on_exit_mq(channel) dict abort - call airline#async#mq_output(self.buf, self.file) - endfunction - - function! s:on_exit_untracked(channel) dict abort - call s:untracked_output(self, self.buf) - if has_key(s:untracked_jobs, self.file) - call remove(s:untracked_jobs, self.file) - endif - endfunction - - function! s:on_exit_po(channel) dict abort - call s:po_output(self.buf, self.file) - call airline#extensions#po#shorten() - endfunction - - function! airline#async#get_mq_async(cmd, file) - if g:airline#init#is_windows && &shell =~ 'cmd\|powershell' - let cmd = a:cmd - else - let cmd = [&shell, &shellcmdflag, a:cmd] - endif - - let options = {'cmd': a:cmd, 'buf': '', 'file': a:file} - if has_key(s:mq_jobs, a:file) - if job_status(get(s:mq_jobs, a:file)) == 'run' - return - elseif has_key(s:mq_jobs, a:file) - call remove(s:mq_jobs, a:file) - endif - endif - let id = job_start(cmd, { - \ 'err_io': 'out', - \ 'out_cb': function('s:on_stdout', options), - \ 'close_cb': function('s:on_exit_mq', options)}) - let s:mq_jobs[a:file] = id - endfunction - - function! airline#async#get_msgfmt_stat(cmd, file) - if g:airline#init#is_windows || !executable('msgfmt') - " no msgfmt on windows? - return - else - let cmd = ['sh', '-c', a:cmd. shellescape(a:file)] - endif - - let options = {'buf': '', 'file': a:file} - if has_key(s:po_jobs, a:file) - if job_status(get(s:po_jobs, a:file)) == 'run' - return - elseif has_key(s:po_jobs, a:file) - call remove(s:po_jobs, a:file) - endif - endif - let id = job_start(cmd, { - \ 'err_io': 'out', - \ 'out_cb': function('s:on_stdout', options), - \ 'close_cb': function('s:on_exit_po', options)}) - let s:po_jobs[a:file] = id - endfunction - - function! airline#async#vim_vcs_clean(cmd, file, vcs) - if g:airline#init#is_windows && &shell =~ 'cmd\|powershell' - let cmd = a:cmd - else - let cmd = [&shell, &shellcmdflag, a:cmd] - endif - - let options = {'buf': '', 'vcs': a:vcs, 'file': a:file} - let jobs = get(s:clean_jobs, a:vcs, {}) - if has_key(jobs, a:file) - if job_status(get(jobs, a:file)) == 'run' - return - elseif has_key(jobs, a:file) - " still running - return - " jobs dict should be cleaned on exit, so not needed here - " call remove(jobs, a:file) - endif - endif - let id = job_start(cmd, { - \ 'err_io': 'null', - \ 'out_cb': function('s:on_stdout', options), - \ 'close_cb': function('s:on_exit_clean', options)}) - call s:set_clean_jobs_variable(a:vcs, a:file, id) - endfunction - - function! airline#async#vim_vcs_untracked(config, file) - if g:airline#init#is_windows && &shell =~ 'cmd\|powershell' - let cmd = a:config['cmd'] . shellescape(a:file) - else - let cmd = [&shell, &shellcmdflag, a:config['cmd'] . shellescape(a:file)] - endif - - let options = {'cfg': a:config, 'buf': '', 'file': a:file} - if has_key(s:untracked_jobs, a:file) - if job_status(get(s:untracked_jobs, a:file)) == 'run' - return - elseif has_key(s:untracked_jobs, a:file) - call remove(s:untracked_jobs, a:file) - endif - endif - let id = job_start(cmd, { - \ 'err_io': 'out', - \ 'out_cb': function('s:on_stdout', options), - \ 'close_cb': function('s:on_exit_untracked', options)}) - let s:untracked_jobs[a:file] = id - endfunction - -elseif has("nvim") - " NVim specific functions - - function! s:nvim_output_handler(job_id, data, event) dict - if a:event == 'stdout' || a:event == 'stderr' - let self.buf .= join(a:data) - endif - endfunction - - function! s:nvim_untracked_job_handler(job_id, data, event) dict - if a:event == 'exit' - call s:untracked_output(self, self.buf) - if has_key(s:untracked_jobs, self.file) - call remove(s:untracked_jobs, self.file) - endif - endif - endfunction - - function! s:nvim_mq_job_handler(job_id, data, event) dict - if a:event == 'exit' - call airline#async#mq_output(self.buf, self.file) - endif - endfunction - - function! s:nvim_po_job_handler(job_id, data, event) dict - if a:event == 'exit' - call s:po_output(self.buf, self.file) - call airline#extensions#po#shorten() - endif - endfunction - - function! airline#async#nvim_get_mq_async(cmd, file) - let config = { - \ 'buf': '', - \ 'file': a:file, - \ 'cwd': s:valid_dir(fnamemodify(a:file, ':p:h')), - \ 'on_stdout': function('s:nvim_output_handler'), - \ 'on_stderr': function('s:nvim_output_handler'), - \ 'on_exit': function('s:nvim_mq_job_handler') - \ } - if g:airline#init#is_windows && &shell =~ 'cmd\|powershell' - let cmd = a:cmd - else - let cmd = [&shell, &shellcmdflag, a:cmd] - endif - - if has_key(s:mq_jobs, a:file) - call remove(s:mq_jobs, a:file) - endif - let id = jobstart(cmd, config) - let s:mq_jobs[a:file] = id - endfunction - - function! airline#async#nvim_get_msgfmt_stat(cmd, file) - let config = { - \ 'buf': '', - \ 'file': a:file, - \ 'cwd': s:valid_dir(fnamemodify(a:file, ':p:h')), - \ 'on_stdout': function('s:nvim_output_handler'), - \ 'on_stderr': function('s:nvim_output_handler'), - \ 'on_exit': function('s:nvim_po_job_handler') - \ } - if g:airline#init#is_windows && &shell =~ 'cmd\|powershell' - " no msgfmt on windows? - return - else - let cmd = [&shell, &shellcmdflag, a:cmd. shellescape(a:file)] - endif - - if has_key(s:po_jobs, a:file) - call remove(s:po_jobs, a:file) - endif - let id = jobstart(cmd, config) - let s:po_jobs[a:file] = id - endfunction - - function! airline#async#nvim_vcs_clean(cmd, file, vcs) - let config = { - \ 'buf': '', - \ 'vcs': a:vcs, - \ 'file': a:file, - \ 'cwd': s:valid_dir(fnamemodify(a:file, ':p:h')), - \ 'on_stdout': function('s:nvim_output_handler'), - \ 'on_stderr': function('s:nvim_output_handler'), - \ 'on_exit': function('s:on_exit_clean')} - if g:airline#init#is_windows && &shell =~ 'cmd\|powershell' - let cmd = a:cmd - else - let cmd = [&shell, &shellcmdflag, a:cmd] - endif - - if !has_key(s:clean_jobs, a:vcs) - let s:clean_jobs[a:vcs] = {} - endif - if has_key(s:clean_jobs[a:vcs], a:file) - " still running - return - " jobs dict should be cleaned on exit, so not needed here - " call remove(s:clean_jobs[a:vcs], a:file) - endif - let id = jobstart(cmd, config) - call s:set_clean_jobs_variable(a:vcs, a:file, id) - endfunction - -endif - -" Should work in either Vim pre 8 or Nvim -function! airline#async#nvim_vcs_untracked(cfg, file, vcs) - let cmd = a:cfg.cmd . shellescape(a:file) - let id = -1 - let config = { - \ 'buf': '', - \ 'vcs': a:vcs, - \ 'cfg': a:cfg, - \ 'file': a:file, - \ 'cwd': s:valid_dir(fnamemodify(a:file, ':p:h')) - \ } - if has("nvim") - call extend(config, { - \ 'on_stdout': function('s:nvim_output_handler'), - \ 'on_exit': function('s:nvim_untracked_job_handler')}) - if has_key(s:untracked_jobs, config.file) - " still running - return - endif - try - let id = jobstart(cmd, config) - catch - " catch-all, jobstart() failed, fall back to system() - let id=-1 - endtry - let s:untracked_jobs[a:file] = id - endif - " vim without job feature or nvim jobstart failed - if id < 1 - let output=system(cmd) - call s:untracked_output(config, output) - call airline#extensions#branch#update_untracked_config(a:file, a:vcs) - endif -endfunction - -function! airline#async#vim7_vcs_clean(cmd, file, vcs) - " Vim pre 8, fallback using system() - " don't want to to see error messages - if g:airline#init#is_windows && &shell =~ 'cmd' - let cmd = a:cmd .' 2>nul' - elseif g:airline#init#is_windows && &shell =~ 'powerline' - let cmd = a:cmd .' 2> $null' - else - let cmd = a:cmd .' 2>/dev/null' - endif - let output=system(cmd) - call s:set_clean_variables(a:file, a:vcs, !empty(output)) -endfunction |